Intermec CK3R Manuale Utente Scaricare il pdf (Pagina 61)

Chapter 3 — Configure the Computer

CK3R and CK3X Mobile Comptuer User Manual 49

By default, the 802.11 radio is disabled. Use the following procedure to

enable the Wi-Fi radio using Intermec Settings.

1 Tap Start > Settings > System > Intermec Settings.

2 From the Intermec Settings main menu, tap Communications >

802.11 Radio > Radio Enabled.

3 Select the Radio Enabled check box and tap OK. By default, the

computer uses Funk security and enables DHCP.

4 Use Intermec Settings to configure the parameters you need to use

for communications with your network.

5 Configure 802.11 security.

About Bluetooth Communications

The CK3 is Bluetooth-enabled, which lets you connect to other

Bluetooth devices such as:

• scanners.

• printers.

• audio devices.

• wireless readers.

You need to turn on the Bluetooth radio before you can discover and

connect to Bluetooth devices. By default, the radio is turned off.

The Bluetooth radio maintains its current state through a warm or

cold boot and maintains virtual COM ports. If you clean boot the CK3,

you must recreate pairings to devices.

You can also access Bluetooth settings using Intermec Settings.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 137 138

Nessun commento

Intermec CK3R Manuale Utente Pagina 61